Cutting Plotter Machine

Graphtec FCX4000 Series No Compromise Low-Cost Die-Free Cutting And Processing

FCX4000 series achieves high quality cutting with improving of the quality and accuracy by enhancing rigidity of the sliding mechanism and the driving system. It is the best flatbed type cutting plotter that has a high usability and productivity equipped with new functions.


Table size in the Line-up

2 different table size are available.

The effective cutting area of the 50ES model is expanded for supporting 2 sheets of A3+ size.

And the 60ES model supports 4 sheets of A3+ size. It is more suitable in the use of post-processing of Print On Demand.

FCX4000-60ES (* Stand is an option.)

Media hold-down method

Electrostatic (*)

Holds media by electrostatic that is generated by electrodes arranged inside the panel. This method is suitable for cutting light weight materials.


Item FCX4000-50ES FCX4000-60ES
Configuration Digital servo system, Flatbed
Media hold-down method Electrostatic panel
Effective cutting area 660 mm × 488 mm 976 mm × 660 mm
Mountable media
(Y-axis direction)
536 mm (21.1 inch) 708 mm (27.9 inch)
Maximum cutting speed 750 mm/s (1 to 75 cm/s in 23 steps), in all directions
Cutting pressure Tool 1: Max. 5.88 N (600 gf)
Tool 2: Max. 5.88 N (600 gf)
Cutting force settings Tool 1: in 48 steps, Tool 2: in 48 steps
Minimum character height Approx. 3 mm square (Approx. 0.12 inch) (varies with character font and media) (*2)
Mechanical resolution 0.005 mm (5µm)
Programmable resolution GP-GL mode: 0.1/0.05/0.025/0.01 mm,
HP-GL™ (*1) : 0.025 mm
Distance accuracy Max.0.2% of the distance moved or 0.1mm, whichever is larger
(value after distance correction / excluding contraction of media, in plotting/cutting mode) (*2)
Perpendicularity Max 0.3 mm / 430 mm
(excluding contraction of media, in plotting/cutting mode)
Max 0.4 mm / 610 mm
(excluding contraction of media, in plotting/cutting mode)
Repeatability Max 0.1mm (excluding contraction of media, in plotting/cutting mode) (*2)
Display Graphic type LCD (240 dots × 128 dots), supports Japanese, English and Chinese
Standard interfaces USB2.0 (Full Speed) / RS-232C / Ethernet (10BASE-T/100BASE-TX)
Command sets GP-GL / HP-GL™ (*1) / AUTO (Automatic switching in GP-GL and HP-GL™ (*1))
Number of tools 2 tools
Cutter blade, pen, and tool types Cutter blade: supersteel
Pen: water-based fiber-tip pen
Creasing/scoring tool (*7)
Operating panel 3.7-inch graphical LCD (same LCD as the FCX2000)
Power supply 100 to 240 V AC, 50/60 Hz (Auto switching)
Power consumption Max. 120 VA
Operating environment Temperature: 10 to 35 degree C ,
Humidity: 35 to 75% RH (non-condensing)
Guaranteed accuracy environment Temperature: 16 to 32 degree C,
Humidity: 35% to 70% RH (non-condensing)
External dimensions (*3)
(W x D x H)
1089 x 897 x 204 mm 1405 x 1069 x 204 mm
(including stand : 1405 x 1097 x 896 mm)
Weight approx. 29kg approx. 38 kg
(including stand : 55 kg)
Compatible OS (*4)(*5) Windows 11 (Home / Pro / Enterprise / Education)
Windows 10 (Home / Pro / Enterprise / Education)
Windows 8.1 (Windows 8.1 / Pro / Enterprise)
Mac OS X 10.7 to 10.11 / macOS 10.12 (Sierra) to 12 (Monterey)
Supported software Cutting Master 4 (*6), Graphtec Pro Studio (*6), Graphtec Studio for Mac, Windows Driver
Safety UL/cUL, CE mark
EMC VCCI Class A, FCC Class A, CE mark (EN55032, others)
(*1) HP-GL™ is registered trademark of the Hewlett-Packard Corporation of the United States. (*2) When operated with Graphtec specified media and conditions. (*3) Tolerance: +/- 5 mm (*4) Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer. (*5) For more information about Windows and Macintosh compatibility, please check the website or contact with your local representative of Graphtec (*6) It requires an Internet connection in order for activation or registration when starting the software for the first time. (*7) Recommend to use with Adhesive sheet or Cling mat.

Media type

〇: Available △:Limited
Type of media Thickness Support cutting blade FCX4000-50/60ES FCX2000-60VC FCX2000-120VC FCX2000-180VC FCX2000-120ES
Self-adhesive marking film (vinyl, fluorescent, reflective) up to 0.25 mm CB09UB-5
Heavy paper/board (pattern paper, oil board) up to 0.5 mm CB15U-5, CB15U-K30-5
up to 1.0 mm CB15U-5, CB30UC-1 (*2)
Compressed foam sheet up to 0.8 mm CB15U-K30-5
Sandblast resist rubber up to 1.0 mm
Cardboard E flute up to 1.5 mm CB30UC-1 (*1)
F / G flute up to 1.2 mm CB30UC-1
Rubber sheet up to 1~2 mm PM-CB-001 (*1)
Clear sheet for plastic boxes up to 0.5 mm CB15U-5
up to 1.0 mm CB15U-K30-5
High-intensity reflective film up to 0.5 mm CB15UA-5
up to 1.0 mm CB15UA-K30-5
(*1) Cutting accuracy is not guaranteed. Be sure to try it before using it.
(*2) CB30UC is not available for FCX4000 series.
(*) When using a media that can not be securely fixed by the electrostatic adsorption system, please use the optional cling mat PM-CM-001 or PM-CM-002.

Standard Accessory

* Please read Cutter Blade Manual before use.
Item Q’ty Description
Power cord 1 The type of cord is different by destination
Cutting blade holder 1 PHP33-CB15N-HS
Cutting blade 1 CB15U-1
Loupe 1 PM-CT-001 (for checking the extruded length of blade)
Pen holder 1 PHP31-FIBER
Water-based fiber-tip pen 1 KF700-BK (Black)
Protect sheet 1 PM-CR-002A for FCX4000-50ES / PM-CR-003A for FCX4000-60ES
USB cable 1 Length 2.9 m
DVD-ROM 1 ・User’s manual (PDF) ・Cutter blade manual ・Windows driver (OPS662) ・Cutting Master 4 (plug-in software for Illustrator/CorelDRAW in Windows, Illustrator in Mac) ・Graphtec Pro Studio (design software for Windows) ・Graphtec STUDIO (Design software for Mac)
Printed documents 1 Quick guide, Usage Precautions, Safety manual


Item Part No. Description
Graphtec Pro Studio Plus OPS682-PLS Design software including all advanced functions. (1 license)
Graphtec Pro Studio Plus for Rhinestone OPS682-RSF Limited edition of rhinestone function only. (1 license)
Graphtec Pro Studio Plus for Auto Nesting OPS682-ANF Limited edition of auto nesting function only. (1 license)
Stand  ST0113 Stand for FCX4000-60ES


FCX4000-50ES External Dimensions

(*) Scale : mm – Tolerance : +/- 5 mm

FCX4000-60ES External Dimensions

(*) Scale : mm – Tolerance : +/- 5 mm

FCX4000-60ES (with optional stand)

(*) Scale : mm – Tolerance : +/- 5 mm
PT. Panji Media Utama, is the official distributor of digital printing machines in Indonesia. We authorize dealers of Mutoh, Graphtech, Silhoute.
Company Info
Quick Menu
Get discount information and the latest product promotions from us, fill in your name and email.

Copyright © 2022 PT. Panji Media Utama
Distributor Mesin Digital Printing Indonesia. All Rights Reserved.

Form Consultation

Don’t hesitate to getting in touch with us, WhatsApp for fast response..