Cutting Plotter Machine

Graphtec CE7000 Series

Enhanced basic specification and excellent cost-effectiveness The cutting plotter CE7000 series has great efficiency as high as high-end model with high cost-effectiveness.

GRAPHTEC CE7000 Cutting Plotter Machine

Features

Size Lineup

Four sizes to match all requirements.

Enhanced performance

Max. cutting force 4.41N (450gf) and Max. cutting speed 1000mm/s

With maximum cutting force 4.41N (450gf) and maximum cutting speed 1000 mm/s (*1), it enable to cut various media with high productivity.
(*1) CE7000-130 / CE7000-160

Cutting performance that guaranties accurate 5m length cutting. (*2)

The media stocker helps stabilize the feeding of media. By adjusting the pressure of the middle push roller to the media in three levels, it prevent media floating. In addition, by using an optional special basket, stability in long cuts can be achieved. (*2) In case that using optional baskets of CE7000-60/130/160 and cutting media and conditions specified by Graphtec.

Data output via USB flash memory without PC

When cutting data designed with Cutting Master 4 or Graphtec Pro Studio / Plus are saved to USB flash memory, it can be output directly to the cutting plotter by plugging in. This simplified work-flow enables users to operate without a computer.
* The USB flash memory format only supports FAT32.
　Please note that NTFS and exFAT are not supported.

Perforation cutting ability

Carrier Sheet Table

It is an optional item that can be attached to the front and back of the cutting plotter to support a carrier sheet.
* Available with CE7000-40 / -60.
* In case that using carrier sheet “CR09300-A3”, Please use together with carrier sheet table “OPH-A45”.

User-friendly control panel

3.7inch LCD display and
easy-to-use control panel supports 10 languages.

Improved ARMS for high precision cutting (ARMS 8.0)

The Advanced Registration Mark Sensing system delivers precise Print & Cut results by using sensors to detect registration marks and perform axis alignment. Countless efficiency boosting features improve productivity for print & cut applications such as stickers and decals.

Data Link Function

(Barcode Data Management/Continuous Cutting)

By reading the Graphtec original Barcode, CE7000 automatically detects its linked data from PC or USB flash memory. This function is available regardless of which printer or RIP software is used.
* The USB flash memory format only supports FAT32.
　Please note that NTFS and exFAT are not supported

Continuous Cut

(Data Link function)

Barcode data management allows cutting different data sequentially by detecting the “Start Mark” of the new Barcode. Sequential Print & Cut process with roll-media is now available.

Supports colored marks / specialty media

A wide variety of media types including holographic paper and reflective sheets are now compatible due to improvements of the ARMS sensor algorithm.
* Sensor may not be able to read certain combinations of specialty media and colored marks.

Supports Adobe Illustrator “Crop Marks”

Using the plug-in software Cutting Master 4, Adobe Illustrator crop marks will be available.

Expanded Cutting Area

The expanded cutting area to include objects outside of the area enclosed by registration marks. Production eficiency is enhanced by reducing media waste.

Specifications

Item		CE7000-40	CE7000-60	CE7000-130	CE7000-160 (Not available in US & Korea)
Configuration		Grit rolling type
Drive method		Digital servo drive
Max. cutting area (W x L) (*1)		375ｍｍ × 50ｍ	603ｍｍ × 50ｍ	1270ｍｍ × 50ｍ	1524ｍｍ × 50ｍ
Cutting area of guaranteed accuracy (*1) (When using optional basket)		355ｍｍ × 2ｍ	583ｍｍ × 2m (583ｍｍ × 5ｍ)	1250ｍｍ × 2m (1250ｍｍ × 5ｍ)	1504ｍｍ × 2m (1504ｍｍ × 5ｍ)
Mountable media width	Min.	50mm
Mountable media width	Max.	484ｍｍ (19inch)	712mm (28inch)	1372mm (54inch)	1626mm (64inch)
Mountable roll media mass		5 kg	9 kg	17 kg	20 kg
Number of push rollers		2 rollers		4 rollers (Max. 5 (option))
Max. cutting speed		600mm/s at all direction	900mm/s at 45° direction	1000mm/s at 45° direction
Acceleration		21.2ｍ/s² at 45° direction		13.9m/s² at 45° direction
Cutting force		Max. 4.41N (450gf)
Minimum character size		Approx. 5 mm alphanumeric (varies depending on character font and media)
Mechanical resolution		0.005mm
Programmable resolution		GP-GL：0.1/0.05/0.025/0.01ｍｍ　HP-GL™ (*2)：0.025ｍｍ
Repeatability (*1)		Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction)
Mountable number of tools		1 tool
Blade types		Supersteel
Pen types		Oil-based ballpoint pen, Water-based fiber-tip pen
Media types		Up to 0.25mm thickness Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions)
Interface		USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX
Buffer memory		2MB
Command sets		GP-GL / HP-GL™ (Set by command or auto-detect) (*2)
Display		Graphic type LCD with back-light (240dots x 128dots), supports 10 languages
Power source		100V to 240V AC, 200V to 240V AC, 50 / 60 Hz
Power consumption		Up to 100W
Operating environment		10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment		16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
External dimensions (approx. W x D x H) (with basket)		772ｘ292ｘ313 mm	1005×582×1092 mm (1005×936×1092 mm)(*3)	1704×811×1215 mm (1704×1148×1215 mm)(*3)	1916×811×1215 mm (1916×1148×1215 mm)(*3)
External dimensions (approx. W x D x H) (with basket)		772ｘ292ｘ313 mm	1005×582×1092 mm (1005×936×1092 mm)(*3)	1704×811×1215 mm (1704×1148×1215 mm)(*3)	1916×811×1215 mm (1916×1148×1215 mm)(*3)
Weight (approx.) (with basket)		13kg	23kg (25.2kg)(*3)	51kg (54.9kg)(*3)	55kg (59.5kg)(*3)
Weight (approx.) (with basket)		13kg	23kg (25.2kg)(*3)	51kg (54.9kg)(*3)	55kg (59.5kg)(*3)
Compatible OS (*4)		Windows 11 / 10 / 8.1 Mac OS X 10.6 ～ 10.11 / macOS 10.12 ～ 12 (Graphtec Studio: 10.6 – 12, Cutting Master 4: 10.7 – 12)
Supported software DOWNLOAD		Graphtec Pro Studio(Windows)(5), Graphtec Studio(Mac), Cutting Master 4(5), Windows Driver

(*1) Operated with Graphtec specified cutting condition and media. For long-length cutting, the basket is used.
(*2) HP-GL^TM is a registered trademark of Hewlett-Packard Company.
(*3) When equipped with the stand.
(*4) Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.
(*5) It requires an Internet connection in order for activation or registration when starting the software for the first time.

Standard accessories

Item	Q’ty	Description
Power cord	1	The type of cord is different by destination.
USB Cable	1	2.9m long
Cutting blade holder	1	PHP33-CB09N-HS
Cutting Blade	1	CB09UB-1P
Loupe	1	PM-CT-001
Fiber-tip pen holder	1	PHP31-FIBER
Water-based Fiber-tip pen	1	KF700-BK (black)
Roll Media Tray	1	Standard accessory for CE7000-40/-60 (* Not available for CE7000-60 in specificate area.)
Stand for CE7000	1	Standard accessory for 130 / 160
DVD-ROM	1	User manual, Windows driver, Graphtec Pro Studio (Windows, 1 license), Graphtec Studio (Mac), Cutting Master4
Printed document	1	SetupManual, Cutter Blade Manual and Safety Manual

Option

Item	Part No.	Description
Basket for CE7000 series	PG0103	For CE7000-60
	PG0104	For CE7000-130
	PG0105	For CE7000-160
Carrier sheet table	OPH-A45	For CE7000-40 or CE7000-60
Additional push roller kit	OPH-A49	Only for CE7000-130/CE7000-160
Optional Stand	ST0118	For CE7000-60
Graphtec Pro Studio Plus	OPS682-PLS	Design software including all advanced functions (1 license)
Graphtec Pro Studio Plus for Rhinestone	OPS682-RSF	Limited edition of rhinestone function only (1 license)
Graphtec Pro Studio Plus for Auto Nesting	OPS682-ANF	Limited edition of auto nesting function only (1 license)

Dimensions

CE7000-40

CE7000-60

CE7000-130 / 160


* Includes stand.
* Tolerance : +/- 5 mm

PT. Panji Media Utama, is the official distributor of digital printing machines in Indonesia. We authorize dealers of Mutoh, Graphtech, Silhoute.

Company Info

Quick Menu

Get discount information and the latest product promotions from us, fill in your name and email.